Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*
Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*

EasyWeed® Electric Heat Transfer Vinyl

Electrify Your Look with Unique Finishes

If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered.

EasyWeed Electric is CPSIA Certified so its perfect for decorating childrens clothing and accessories.
Siser EasyWeed Electric HTV
Specifications:
PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils
• 45°/60° blade • Can be layered
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Iron-on		Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Thickness: 6		Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s		Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s		MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies		Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold		Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
EasyWeed Electric Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather		Recommended Accessories:
Siser Weeder		Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold/ mild detergent
Dry on normal dryer setting
Do not dry clean
" class="zoomMainImage swiper-slide">

EasyWeed® Electric Heat Transfer Vinyl

Electrify Your Look with Unique Finishes

If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered.

EasyWeed Electric is CPSIA Certified so its perfect for decorating childrens clothing and accessories.
Siser EasyWeed Electric HTV
Specifications:
PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils
• 45°/60° blade • Can be layered
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Iron-on		Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Thickness: 6		Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s		Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s		MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies		Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold		Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
EasyWeed Electric Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather		Recommended Accessories:
Siser Weeder		Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold/ mild detergent
Dry on normal dryer setting
Do not dry clean
" alt="Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*" width="527" height="527" />
Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*
Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*
Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*
Rouleau de transfert de chaleur électrique Siser EasyWeed vinyle 15 pouces achats * options de longueur*